• CartCart
• TermsTerms
• Contact UsContact Us
• HomeHome

We knew that you were yearning for real horsepower and torque out of a hand held, and we delivered with the new Xcelerator. The Xcelerator was specifically designed for 2001 through early 2004 Duramax Diesel trucks and provides speedometer corrections (for tire sizes ranging from 25" to 44.75" in ¼" increments, and/or gear changes from 2.23 to 5.13), governor removals, and four levels of performance. This unit also retains the stock program so that the truck can be put back to the original settings if the need arises. It increases the efficiency of the vehicle, which increases fuel mileage (2-3mpg on average). The Xcelerator also defules for upshifts and down shifts in order to allow transmission to engage into next hear without the need for extreme transmission modifications.

For big power, PPE developed the Xcelerator LLY Series. These hand held units are designed to work with the 2004 - 2005 LLY 6.6L Duramax Diesel truck. LLY engine is designated by a 2 on the eighth digit of the VIN. Features of the LLY Xcelerator Series of hand helds include additional horse power and torque depending on which model you decide to invest in. They also provide speedometer corrections (for tire sizes rangind from 25' to 44.75 in 1/4 increments, and/or gear changes from 2.23 to 5.13), governor removals**, and three or four power levels***.

This version of our Xcelerator gives a maximum of 180 extra HP for your 2006 LLY or LBZ Duramax Diesel. Also has the standard 3 power settings, speedometer corrections, engine governor removal and increased fuel mileage.

Once again, for your biggest power, PPE developed the H1 Alpha Xcelerator. This unit is designed to work with the 2006 H1 Hummers with the Duramax Diesel.

Features of the H1 Alpha Xcelerator include up to an additional 280hp, speedometer corrections (for tire sizes ranging from 25" to 44.75" in ¼ increments, and/or gear changes from 2.23 to 5.13), governor removals, and seven levels of performance.Program levels 1 thru 7 will remove fuel (defuel) from engine during shifts as needed to keep an un-modified transmission from slipping. In addition, the H1 Alpha Xcelerator raises the rev limiter to 3,800RPM. This unit also retains the stock program so that the truck can be put back to the original settings if the need arises. The H1 Alpha Xcelerator increases the efficiency of the vehicle, which increases fuel mileage (2-3mpg on average). It also defuels for upshifts and down shifts in order to allow transmission to engage into next gear without the need for extreme transmission modifications. In addition to being an all-star in the world of performance, the Xcelerator is also capable of reading and clearing Data Trouble Codes (DTC) through the OBD II port. H1 Alpha Xcelerator can reset the Allison transmission for Fast Learn operation to begin. In order to insure that you are getting the best product available, we have tested this product off-road, in the desert, the ¼ mile drag strip, the Rocky Mountains , and in the dyno room. You can also stack the Duramaximizer, Propane, and/or Nitrous with the Xcelerator for even greater results. Take a look at the charts on the next page to see what this product is capable of doing.

(Note: This unit delivers extreme horsepower and torque. Upgrades to the drivetrain are highly recommended!)

*Hard shell case included* * Horsepower and Torque is represented at the crank

Application: 2006 Duramax Diesel H1 Hummers.

HP/Torque: Up to an additional 280hp

Features: 7 Power level tunes, tire size, gear ratio and speedometer corrections. Speed limiter removal.

Installation: Simple download into the OBD II port under the dash. 1-year warranty.

For those looking for power, PPE is delivering with the Xcelerator for the 2003-2005 Dodge Cummins Common Rail. The Dodge Xcelerators come in three flavors, the 2006 CR610, the 2004.5 - 2005 CR600 and the 2003-2004 CR550. Both Xcelerator give an additional 215HP and 325 Ft-lbs of torque. You can also increase the engine rev limiter up to 3700, and It also comes in three levels of performance. This Xcelerator is designed for the true enthusiast who wants the best for their RAM. No other programmer does so much, for so little. This unit is great for towing, drag racing, off-road, sled pulling and more.

The Xcelerator also retains the stock program so that the truck can be put back to the original settings if the need arises. By increasing the efficiency of the engine, Xcelerator increases fuel mileage (2-3mpg on average).

(Note: *Horsepower and Torque is represented at the crank)

Application: Dodge Cummins 2003 - 2004 CR550, 2004.5-2005 CR600, and 2006 CR610

HP/Torque: Additional 215HP and 325 Ft.-lbs of Torque max at the flywheel.

Features: Four power levels, Speedometer corrections, Speed limiter removal, retains stock programming, and much, more...

Installation: Simple download into the OBD II port under the dash. 1-year warranty.

We knew that you were yearning for real horsepower and torque out of a hand held, and we delivered with the new Xcelerator. This Xcelerator was specifically designed to work on the 2003-2005 Ford 6.0L PowerStroke Diesel.Features of the Xcelerator include up to an additional 220hp and 465ft.-lbs of torque, ten levels of power settings, top speed limiter removal, and three levels of transmission level tunning (aggressive, smooth and stock transmission). This unit also retains the stock program so that the truck can be put back to the original settings if the need arises. In addition to being an all-star in the world of performance, the Xcelerator is also capable of reading and clearing Data Trouble Codes (DTC) through the OBD II port.

In only a few moments of time your PowerStroke truck will experience greater horsepower and torque, plus gain fuel mileage without sacrificing OEM reliability. At PPE we know that you want your diesel to last and that is why we manufacture our products to keep your diesel running strong for years to come.

(Note: *Horsepower and Torque is represented at the crank)

Application: 2003-2006 Ford 6.0L Power Stroke diesel trucks

HP/Torque: Up to an Additional 200Hp and 440Ft.-lbs of Torque at the flywheel.

Features: Ten power levels & retains stock programming.

Installation: Simple download into the OBD II port under the dash. 1-year warranty.